If you have done drywall work you probably understand how difficult certain areas are to reach. Without a drywall lift (Red Line Professional 11-Foot Drywall Lift Panel Hoist Jack
I had a ceiling job to do so that we can move forward with other projects in this room and we didn’t want to wait on the pros to do this section. I decided to fashion a lift to make the job safe and easy. The lift that I built was pretty straightforward and turned out to do a little more than I expected. At first this was going to be a 2 person job. When my co-worker didn’t arrive, I decided to give the 14′ ceiling a go on my own. Just prior to doing so, I taped my phone to a nearby ladder and turned the video on. I figured that this was going to go well, or terribly bad. Either way, I wanted to be sure that I captured it.
I modeled the lift using Google Sketchup. Sketchup is a terrific (and free) 3d design program. It is remarkably easy to use if you have any CAD experience. Here is a link to my Sketchup file.
DIY Drywall Lift
The material used was nothing more than 7 2×4’s and 3 hinges. I screwed the 2x’s together with 3″ drywall screws and fastened the hinges to a cleat that I then screwed to the wall (the cleat is the 7th 2×4 if you were wondering). By screwing the hinges to the cleat while on the ground it allowed me to position the entire lift at the correct height. I was then able to screw the cleat off at a few points without having to hold the whole rig up. [fusion_builder_container hundred_percent=”yes” overflow=”visible”][fusion_builder_row][fusion_builder_column type=”1_1″ background_position=”left top” background_color=”” border_size=”” border_color=”” border_style=”solid” spacing=”yes” background_image=”” background_repeat=”no-repeat” padding=”” margin_top=”0px” margin_bottom=”0px” class=”” id=”” animation_type=”” animation_speed=”0.3″ animation_direction=”left” hide_on_mobile=”no” center_content=”no” min_height=”none”]
Once the piece closest to the wall was fastened to the ceiling (lift up to the 2×4 @ 48″ and swing up), I was then able to place the next piece a cleat at the base of the lift and lift/fasten. I was nervous about doing this solo since I hadn’t tested the strength of my setup. The sheets of drywall were 95 pounds each so a crash wouldn’t be without some damage below (me).
Video: .[/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]